since 1956 - celebrating our 56th year!
Thermal Management for Enclosures
Call Today! (800) 321-KOOL
Made in the USA
 
Refresh browser to display menu
 

KB653 High Performance Fan

Click to Request Quote
Model
 Normally
In Stock
Volts
CFM @ 0" S.P.
RPM Nominal
Amps
Watts
Approx. Weight
Run
L.R.
Lbs.
Kg.
KB653
Yes
110
385
3200
1.8
2.5
120
5
2.3

115V, 60 Hz. operation.

High Performance Fan

STANDARD FEATURES

  • 385 CFM Capacity
  • Small size for restricted space
  • Quiet operation
  • High static pressure performance
  • Will pressurize or exhaust
  • Rugged construction with baked powder finish
  • UL/CSA ball-bearing motors
  • 12-inch (300mm] (minimum) power and ground leads

ACCESSORIES AND OPTIONS
DIMENSIONS (click and drag to pan)
Dimensions, inches [mm], are for reference only and subject to change.
 
HOW TO ORDER

Specify model number. For 230 VAC operation, add a 2 after the K. Example: K2B653.

 
SIMILAR MODELS
Model
Guideline
Dimensions
(H x W x D)*
CFM
KJ200
5.13 x 5.56 x 2.81
200
*Includes flanges where applicable. See model specifics for drawings, dimensions, mounting or cutout plans.
lPERFORMANCE CHART
 
Airflow vs. static pressure curves are shown for 60 Hz (solid line) and 50 Hz (broken line) inputs. Static pressure is in inches of water.

Accessories for High Performance Fans

The following accessories, available at moderate cost, add versatility to the application of these High Performance fans.

KB653 Fan Accessories

Filter: Model 654F: 8.25" [209.6mm] square x 0.50" [12.7mm] deep. All Kooltronic filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required whenever air is drawn into an electronics enclosure. A non-drying adhesive coating traps a high percentage of particulate matter. These washable, reuseable filters are designed to last the life of the cooling unit. Replacements are available for those which become damaged or otherwise non-serviceable.

Filter Holder: Model 654HF: Precision-made heavy gauge steel construction. Can be mounted either internally or externally on enclosure using (4) .187" [4.7mm] dia. holes (see diagram below) Suggested use is on the intake (motor) side of the fan where it will add less than 0.75" [19.1mm] to the depth of the fan. Filter inserts easily.

Guard: Model 654G: Made of sturdy corrosion- protected wire, these guards comply with OSHA and UL safety standards. Suggested use is on blade side of fans and on motor side, if being used without a filter. Adds less than 0.75" [19.1mm] to depth of fan.

Caution: We strongly recommend proper guarding of fans to prevent serious injury.
Model 654HF Filter Holder

Dimensions, inches [mm], are for reference only and subject to change.

HOW TO ORDER

Accessories: Specify model number.

 
 
 
  Products - Services - News - Design Guide - Downloads - About Us - Manufacturing - Support - Contact Us We accept Visa and Mastercard We accept Company Purchase Orders
 
  © 1996- 2012 Kooltronic, Inc. - All rights reserved. - Terms of Use