logo
since 1956 - celebrating our 61st year!
Thermal Management for Enclosures
Call Today! (800) 321-KOOL
US Flag Made in the USA
Saturday, September 24, 2016
home quote sitemap
 
Refresh browser to display menu
 

KJ200 Kool-Jet High Performance Fan

Click to Request Quote
Model
Normally
In Stock
Volts
CFM @ 0" S.P.
RPM Nominal
Amps
Watts
Approx. Weight
Run
L.R.
Lbs.
Kg.
KJ200
Yes
110
200
3100
0.8
1.1
55
4
1.8

115V, 60 Hz. operation.

High Performance Fan


STANDARD FEATURES

  • 200 CFM Capacity
  • Small size for restricted space
  • Quiet operation
  • High static pressure performance
  • Will pressurize or exhaust
  • Rugged construction with baked powder finish
  • UL/CSA ball-bearing motors
  • 12-inch (300mm] (minimum) power and ground leads


ACCESSORIES AND OPTIONS

DIMENSIONS (click and drag to pan)
Dimensions, inches [mm], are for reference only and subject to change.
 
HOW TO ORDER

Specify model number. For 230 VAC operation, add a 2 after the K. Example: K2J200.

 

SIMILAR MODELS
Model
Guideline
Dimensions
(H x W x D)*
CFM
KB653
6.94 x 6.94 x 4.38
385
*Includes flanges where applicable. See model specifics for drawings, dimensions, mounting or cutout plans.
PERFORMANCE CHART
 
Airflow vs. static pressure curves are shown for 60 Hz (solid line) and 50 Hz (broken line) inputs. Static pressure is in inches of water.

Accessories for High Performance Fans

The following accessories, available at moderate cost, add versatility to the application of these High Performance fans.

KJ200 Fan Accessories

Filter: Model 200F: 5.88" x 4.31" x 0.50" [149.4mm] x [109.5mm] x [12.7mm]. All Kooltronic filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required whenever air is drawn into an electronics enclosure. A non-drying adhesive coating traps a high percentage of particulate matter. These washable, reuseable filters are designed to last the life of the cooling unit. Replacements are available for those which become damaged or otherwise non-serviceable.

Filter Holder: Model 200H: This set of two brackets (see diagram below) allows mounting to fan and cabinet or other mounting surface in enclosure. If unused, studs can be clipped off. Filter slides in easily.

Guard: Model 200G:Precision made protective guard complies with OSHA and UL safety standards. Fully covers either side of fan, Mounting holes on 3.50" [88.9mm] centers align with outer holes on fan. (See KJ200 diagram above). Adds less than 0.25" [6.35mm] to depth of fan.

Caution: We strongly recommend proper guarding of fans to prevent serious injury.

Model 200H Filter Holder

Dimensions, inches [mm], are for reference only and subject to change.

HOW TO ORDER

Accessories: Specify model number.
 
 
     
 
  Products - Services - News - Design Guide - Downloads - About Us - Manufacturing - Support - Contact Us We accept Visa and Mastercard We accept Company Purchase Orders
 
  © 1996-2016 Kooltronic, Inc. - All rights reserved. - Terms of Use