|
High Performance Fans - These fans are ideal for applications which present the challenges of severe space limitations and/or higher static pressures that prevent the use of conventional fans. Typical uses include computer tape drive servo motors, densely packed printed circuit board arrays and duplicating equipment.
KJ200 KOOL-JET: The Kool-Jet High Performance Fan is specifically designed to overcome severe space limitations in electronics and instrumentation cooling.
The excellent pressure characteristics of the Kool-Jet Fan result from the adaptation of tube-axial fan principals. Either push or pull airflow is available in one unit. It is the only shock-mounted fan of its type, eliminating transfer of vibration or AC hum into equipment.
The KJ200 delivers up to double the cooling power of similar sized units with minimal added cost. The all-metal design is virtually indestructible in normal use.
KB653: Within its recommended operating range (150 - 320 CFM), the KB653 fan provides more air than other fans of comparable size. It is also quieter, less costly and overcomes higher static pressures. It can be mounted to pressurize or exhaust the enclosure. (Pressurizing, with use of a filter, is preferred).
|
Thin Fans -These uniquely compact and versatile fans are designed specifically for cooling electronics and are unsurpassed for their economy of space. Delivering from 210 to 840 CFM, these powerful fans provide a large volume of air to ensure a broad distribution of the cooling effect throughout an enclosure. Complementing these fans is a complete line of accessories.
Kooltronic Thin Fans are designed for
mounting in virtually any position, internally or externally. With or without accessories, these fans can be mounted directly to a panel or door of the electronics enclosure. Often they can be located in the base or top of the enclosure, leaving side walls and all or most of the panel space free.
Each fan, whether a B Series or an S Series, can be used to either pressurize or exhaust the enclosure by simply reversing its orientation. After selecting the basic model of fan for the performance required, the final choice will be determined by the differences in their configurations and dimensions, the preferred location for mounting and whether the need is to pressurize or exhaust the enclosure. Because of the numerous combinations of choices available, virtually any requirement can be met. |
KoolTray II -The Standard KoolTray II delivers cooling air to hot spots by localizing fan placement to the heat generating area(s). With its 13/4-inch [44.5mm] single-U height it fits right under card racks or near heat-producing sources. Standard units are available in 1, 2, or 3 row models. 19-inch [482.6mm] unit width is standard.
Smart KoolTray II: In addition to specific cooling fan placement, the Smart KoolTray II provides two optional choices of component protection. The X5 option sends both a visual and external alarm in the event of fan failure or low fan speed. The X7 option varies the fan speed as temperature decreases or increases relative to the set point and sends an alarm for high temperature conditions. The X6 option combines both the X5 and the X7 options.
Filtered KoolTray II: For environments which require filtration of the ambient or cabinet air, Kooltronic's Filtered KoolTray II filters the air from the bottom side of the tray. Other filter location options are available. Filtered versions are available on both the Standard and the Smart Kooltray II.
|
|
Packaged Fans - Twin and Triple Fans: In low static pressure applications, these fans provide high airflow in a very thin package. An exclusive Kooltronic design provides exceptionally quiet operation in both intake and exhaust applications. Whether mounted horizontally or vertically, these minimum vibration fans require little internal cabinet space, leaving virtually the entire cabinet free for power supplies or other components. Both the KP500 (Twin) and KP875 (Triple) fans fit standard 19-inch equipment racks.
Filter Box Fans: High airflow with low noise operation makes these versatile packaged fans very popular in a wide range of applications, especially with their minimal internal cabinet depth requirement.
Reversible designs allow user to push or pull air through the enclosure. In addition, these fans can be installed internally or externally, vertically or horizontally, with or without a filter on either side. With the Kooltronic special motor mount isolation system, these fans operate virtually vibration-free. Front and rear grilles can be adjusted to accommodate or omit filter. Filters are easily removed for cleaning or replacement. |
Filter Fans - Designed for cooling the interior of cabinets containing electronics, the Advantage Series Filter Fans are a cost-effective solution for a variety of applications. Filter Fans can be used where filtered ambient air is acceptable, and where the equipment can tolerate temperatures slightly above ambient.
Advantage Filter Fans feature durable, attractive plastic grilles which contribute to a clean, linear design. They also boast an extremely flat profile, which blends well with modern enclosures and keeps the unit from protruding from the cabinet wall. |
|
