Kooltronic Powder Paint System Features:

• Overhead Conveyor System - Transports the parts in a continuous loop through all of the stages of the painting process. It allows us to handle a large volume of work with accuracy and efficiency.
  
• Five Stage Power Wash/Pretreatment System - This step is the key to the excellent corrosion protection afforded by the Kooltronic Powder Paint System. The pretreatment process prepares painted parts and creates a solid foundation for our baked on epoxy or polyester powder coatings. Each stage uses a tank, recirculating pump and nozzle array. All solutions are sprayed with nozzles directed at the parts from both sides of the Power Wash Tunnel. The five stage power wash/pretreatment system consists of:

First Stage - A heated wash.
Second Stage - A heated rinse.
Third Stage - A pretreatment solution is applied to the unpainted parts.
Fourth Stage - A heated rinse is used to remove the pretreatment solution.
Fifth Stage - The final step is a sealer.

At each stage of the above pretreatment process, the system chemistry is maintained to assure a level of quality that will protect your parts from harsh weather and corrosion.

• Water Dry Off Oven - Heated air, maintained at a uniform temperature, is circulated around the parts to dry the chemical protection applied during the pretreatment process.
  
• Paint Powder Application - Three powder paint booths are available for your use. Booths feature manual as well as automatic paint gun stations to assure maximum coverage.
  
• Cure Oven - Painted parts are heated in circulated air that is maintained at a uniform temperature.