Enclosure Cooling | Enclosure Air Conditioners | Cooling Excellence for Electronics

Electronic Hygrotherm

The KSHTC Hygrotherm senses the ambient temperature and relative air humidity. Depending on which contact combination is chosen, it then turns on or off a connected device if either the temperature is below, or the humidity above the set point. The integrated LED in each adjustment knob is lit, indicating the active function.
Click to Request Quote	Model	Power	Scale
	KSHTCF	120-230 VAC, 50/60 Hz	°F / %RH
	K2SHTC	120-230 VAC, 50/60 Hz	°C / %RH
	K7SHTC	24-48 VDC	°C / %RH
* Contact Kooltronic for quantity pricing.
Controls both temperature and humidity Optical function displays DIN rail mountable High switching capacity

Click on image for larger view

TECHNICAL DATA

Temperature range:

32-140°F (0-60°C) adjustable

Humidity range:

50-90% RH adjustable

Switching difference (temperature):

Approximately 3.6°F (2K) ± 1K tolerance

Switching difference (humidity):

Approximately 4% RH ± 1% tolerance

Response time:

Approximately 5 seconds

Contact type:

Change-over contact

Relay output (max. switching capacity):

0. 6A @ DC60 V*

Max. inrush current

AC 30 A for 10 sec.

Service life:

>30,000 cycles

Function control light:

LED

Connections:

5-pole terminal for AWG 14 max. (2.5 mm)**

Mounting:

Clip for 35mm DIN rail (EN 60715)

Housing:

Plastic, UL94V-0

Weight:

Approximately 3.5 oz (100g)

Mounting position:

Vertical

Operating temperature:

-40 to 140°F (-40 to 60°C)

Storage temperature:

-40 to 140°F (-40 to 60°C)

Protection type:

IP20

*Not UL confirmed.
**When connecting with stranded wires, wire end ferrules must be used.

Input:

Contacts 1 & 2: Supply voltage

Relay output:

Contacts 3 & 5 and contacts 4 & 5 (see table below)

Contacts	close at...	open at...	use for
3 and 5	humidity rise or temperature drop	humidity drop or temperature rise	heaters, de-humidifiers, low-temp alarms
4 and 5	humidity drop or temperature rise	humidity rise or temperature drop	cooling, humidifiers, high-temp alarms

DIMENSIONS
Click on image for larger view

DIMENSIONS
Click on image for larger view

Dimensions, inches [mm], are for reference only and subject to change.

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.

HOW TO ORDER

Specify model number.

Contact Info:
	Kooltronic, Inc. 30 Pennington-Hopewell Road Pennington, NJ 08534 USA
	609-466-3400
	Contact Us