KP528 Packaged Blower

Image 1 of 1

Select Model Type


Air Discharge:

Model	Volts	Hz	CFM @ 0" S.P.	Cutoff S.P.	RPM Nominal	Amps		Watts	Approx. Weight		Air Discharge
Model	Volts	Hz	CFM @ 0" S.P.	Cutoff S.P.	RPM Nominal	Run	L.R.	Watts	Lbs.	Kg.	Air Discharge
KP528A	115	60	130	0.8	3150	1.2	1.9	85	13	5.9	Rear, Upward
KP528B	115	60	130	0.8	3150	1.2	1.9	85	13	5.9	Rear
KP528C	115	60	130	0.8	3150	1.2	1.9	85	13	5.9	Top, Rear
KP528D	115	60	130	0.8	3150	1.2	1.9	85	13	5.9	Top, Front

115V, 60 Hz. operation.

TECHNICAL DATA

Model Number	Volts	Hz	CFM @ 0" S.P.	Watts	Air Discharge
KP528A	115	115	130	85	Rear, Upward
Cutoff S.P.: 0.8 RPM Nominal: 3150 Amps, Run: 1.2 Amps, L.R.: 1.9 Approx. weight: 13 lbs. (6 kg)
KP528B	115	115	130	85	Rear
Cutoff S.P.: 0.8 RPM Nominal: 3150 Amps, Run: 1.2 Amps, L.R.: 1.9 Approx. weight: 13 lbs. (6 kg)
KP528C	115	115	130	85	Top, Rear
Cutoff S.P.: 0.8 RPM Nominal: 3150 Amps, Run: 1.2 Amps, L.R.: 1.9 Approx. weight: 13 lbs. (6 kg)
KP528D	115	115	130	85	Top, Front
Cutoff S.P.: 0.8 RPM Nominal: 3150 Amps, Run: 1.2 Amps, L.R.: 1.9 Approx. weight: 13 lbs. (6 kg)

115V, 60 Hz. operation.

Standard Features
Accessories & Options
Performance
Arrangement
Similar Models
Documents

• 130 CFM Capacity
• Attractive 19-inch [482.6mm] stainless steel grilles
• Dual inlet quadruplex blower design for maximum airflow
• Exhaust guards included
• Filters for Packaged Blowers
• Heavy-gauge steel shell, EIA-notched flanges and baked powder finish
• Inlet air cools motor for longer life
• Three foot [0.9m] (minimum) 3-wire power cord
• UL/CSA Ball-Bearing Motors

All motors, whether permanent split capacitor or shaded pole, are UL/CSA Recognized and include automatic-reset thermal overload protection. Designed for low temperature rise, Kooltronic motors are also cooled by the blowers' intake air, for maximum motor life. All motors are UL Recognized and carry a Declaration of Conformity to applicable CE Standards. Special permanent lubricants perform over a broad temperature range: -20°F (-29°C) to 250°F (121°C).

• Adapters
• Airflow Switch
• Automatic Speed Control (Basic Blowers)
• EMI/RFI Shielding
• Filter Recoating Adhesive

This compound is a superior product for recoating filters after washing. The adhesives penetrate dirt layers to keep the filter surface tacky for longer effective performance between washings.

• Grille Assemblies for replacement
• Other voltages and frequencies
• Replacement Filters

All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible.,A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reuseable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacements are available for those which become damaged or otherwise non-serviceable.

• Special external paint finishes
• Special line cord or connectors

Click on image for larger view
General Arrangement Thumbnail

KP528 Packaged Blower general arrangement drawing

Dimensions, inches [mm], are for reference only and subject to change.

Model	Guideline Dimensions (H x W x D)*	CFM @0" S.P.
KP1051 Packaged Blower	10.50 x 19.00 x 13.13	800
KP350 Packaged Blower	3.50 x 19.00 x 10.50	160
KP529 Packaged Blower	5.25 x 19.00 x 6.25	260-300
KP701 Packaged Blower	7.00 x 19.00 x 10.06	330
KP729 Packaged Blower	7.00 x 19.00 x 10.25	470
KP877 Packaged Blower	8.75 x 19.00 x 11.56	525
*See model specifics for drawings, dimensions, mounting or cutout plans.

3-D Solid Model

	KP528A Solid Model [4941Kb]
	KP528B Solid Model [3776Kb]
	KP528C Solid Model [4961Kb]
	KP528D Solid Model [5405Kb]

Data Sheet

KP528 Product Data Sheet [3509Kb]

GA Drawing

	GA Drawing Packaged Blower KP528A [38Kb]
	GA Drawing Packaged Blower KP528B [37Kb]
	GA Drawing Packaged Blower KP528C [38Kb]
	GA Drawing Packaged Blower KP528D [38Kb]

Literature

	Increasing the Lifespan and Reliability of Electrical Components [212Kb]
	Kooltronic Custom Capabilities Flyer [2194Kb]
	Kooltronic Custom Cooling Medical Flyer [211Kb]
	Kooltronic Design Guide/Catalog (220 pages) [229400Kb]
	Kooltronic Refrigeration System Manufacturing [55Kb]
	Kooltronic Standard Warranty [55Kb]
	Kooltronic Unit Longevity Press Release [167Kb]
	NEMA Enclosure Ratings [91Kb]
	Short-Form Catalog (16 pages) [897Kb]
	Airflow Switch Data Sheet [159Kb]
	Laboratory Environmental Testing Services [157Kb]
	Powder Paint Application Facilities Flyer [165Kb]
	Packaged Blower Quick-Sheet [92Kb]

Contact Info:
	Kooltronic, Inc. 30 Pennington-Hopewell Road Pennington, NJ 08534 USA
	609-466-3400 800-321-KOOL
	609-466-1114 (fax)
	Contact Us

KP528 Standard Twin Packaged Blowers