Contact Us! 609-466-3400
Toggle navigation
Home
Products
Air Conditioners
Fans and Fan Trays
Custom Cooling Design
Basic Blowers
Packaged Blowers
Heat Exchangers
Enclosure Accessories
Spare/Replacement Parts
Product Documentation
Sizing
About Us
About Kooltronic
Kooltronic and the Environment
Virtual Tour
Kooltronic Timeline
Quality Standards
Services
Careers with Kooltronic
Contact Us
Sales Team
Contact Us
After Sale
K
are (ASK)
Blog
Compact Series
Air-Cooled Top-Mounted Air Conditioners
Download
Product
Information
TECHNICAL DATA
Click to
Request
Quote
Model
NEMA
Rating
UL/CUL
Listed or
Recognized
BTU/H
Capacity
95/95
Rating
BTU/H
Ambient Temp.
Volts
Hz
Running
Amps
Approx.
Weight
°F
°C
Max./Min.
Max./Min.
lbs
kg
KA4C4HTL
Recognized
4000
3442
122/50
50/10
115/100
60/50
10.0
85
39
K2A4C4HTL
Recognized
4000
2984
125/50
52/10
230/200
60/50
5.0
85
39
Rating shown is for operation at maximum ambient temperature.
Fuse Amps for these units are 15.
Click on image for larger view
TECHNICAL DATA
Click to
Request
Quote:
Model
Number:
KA4C4HTL
K2A4C4HTL
NEMA
Rating:
UL/CUL
Listed or
Recognized:
Recognized
Recognized
BTU/H
Capacity:
4000
4000
95/95 Rating
BTU/H:
3442
2984
Ambient
Temp °.F
Max./Min.:
122/50
125/50
Ambient
Temp °.C
Max./Min.:
50/10
52/10
Volts:
115/100
230/200
Hz:
60/50
60/50
Running
Amps:
10.0
5.0
Approx.
Weight lbs.:
85
85
Approx.
Weight kg.:
39
39
Rating shown is for operation at maximum ambient temperature.
Fuse Amps for these units are 15.
STANDARD FEATURES
Built-in Condensate Evaporator
Built-in Condensate Evaporator eliminates need for draining condensate under normal operating conditions. May not be adequate in extremely high humidity with open or leaky enclosure. Overflow condensate drain fitting and hose are included.
CFC-Free Refrigerant
CFC-free R134a Refrigerant is used
Closed-Loop Cooling
The enclosure interior airflow system is isolated from the ambient airflow or waterflow system. No ambient air can invade the cool, dehumidified sensitive component compartment.
Compressor Short Cycle Protector
Protects the compressor from possible damage due to harmful short cycling, (frequent starting) where temperature controls enable the compressor to restart frequently or after a power interruption. These conditions could be due to low or fluctuating heat loads within the electrical enclosure or a power failure. The Compressor Short Cycle Protector will prevent the compressor from starting when it has been shut off for less than several minutes or the power was interrupted. By limiting the number of compressor starts per hour, the life of the compressor is prolonged. It is recommended where installations are subject to solar gain and or changes in the enclosure internal load due to the degree of usage of the equipment being cooled. It is also recommended where higher capacity units are specified in anticipation of the future addition of heat producing equipment being added to the enclosure.
Filter
All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible. A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reuseable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacements are available for those which become damaged or otherwise non-serviceable.
Low Ambient Kit
Maintains sufficient operating pressures when ambient temperatures drop below 50°F. Includes a compressor heater and a pressure device that senses the reduced discharge pressure and modulates the condenser blower. Effective to a minimum ambient temperature of 0°F.
Programmable Temperature Alarm
All models feature a programmable temperature alarm to alert if early action is required.
Programmable Thermostat
All models feature a programmable thermostat, allowing more accurate and versatile performance features.
UL/CUL Recognized
ACCESSORIES AND OPTIONS
Filter Recoating Adhesive
This compound is a superior product for recoating filters after washing. The adhesives penetrate dirt layers to keep the filter surface tacky for longer effective performance between washings.
Internal Corrosion Protection
This protection increases reliability in hostile environments. This protection for the refrigeration system consists of an air cured coating applied to the brazed joints on the condenser side, providing a degree of protection from corrosive environments. This coating will withstand 1000 hours of salt spray per the ASTM B 117 test method. Also see Stainless Steel Cabinet or GuardianX Air Conditioners. NOTE: Severe operational environments such as waste water treatment and salt spray are likely to cause corrosion failure over a period of time regardless of coating. Warranty: Corrosive conditions may affect the warranty coverage. Consult factory for warranty limitations in corrosive environments. NOTE: For additional corrosion protection options, contact factory.
Lead-Lag Controller
Lifting Eyes
Heavy-gauge steel lifting eyes, attached to the side panels, assist in positioning units.
Remote Monitoring
An optional feature for models with Programmable Thermostat, Remote Monitoring provides temperature data for warning of early action required.,Accomplished through a Hot Key connection from the Programmable Thermostat to a monitoring system (not supplied) that is ModBus-RTU compatible (i.e. XWEB500/3000/300) via an external 2-position terminal block.
Remote Thermostat Relay
Used only with a user-installed remote thermostat or the Kooltronic KLLC100 Lead Lag Controller, this 24VAC relay can be used for the sequential operation of two units or with a single unit. An external terminal strip is provided for field interconnection. NOTE: User-installed thermostat must have a set point of 75°F with a differential of 11°F. NOTE: A factory installed thermostat is not provided with this option.
Replacement Filters
All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible.,A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reuseable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacements are available for those which become damaged or otherwise non-serviceable.
Special controls or indicators
Special materials or finishes
Special motors, line cords or connectors
For
Compact
models the filter part number is
7131F
.
Enclosure Lights
AIRFLOW
Click on image for larger view
PERFORMANCE
GENERAL ARRANGEMENT
Click on image for larger view
Dimensions, inches [mm], are for reference only and subject to change.
GENERAL ARRANGEMENT
Click on image for larger view
Dimensions, inches [mm], are for reference only and subject to change.
Many popular units are available as 3D solid models for customer system integration. Contact Kooltronic for details
.
SIMILAR MODELS
Model
Guideline
Dimensions
(H x W x D)*
BTU/H Rating
Rack/Top-Mount H5
12.13 x 17.25 x 22.00
5000
Horizontal Super-Mini
9.06 x 14.00 x 16.00
2500
*See model specifics for drawings, dimensions, mounting or cutout plans.
DOCUMENTS
Data Sheet
KLLC100-480 Lead-Lag Controller Product Data Sheet [58Kb]
HT Top-Mounted Data Sheet [420Kb]
GA Drawing
Compact HT (1,000-4,000 BTU/H) General Arrangement Drawing (OLD) [77Kb]
Compact HT General Arrangement Drawing W/ Programmable T-stat [254Kb]
Installation Instructions
K_A4C4HTL Installation Instructions (2 pages) [154Kb]
K_A4C4HTL Installation Instructions (2 pages) W/ Programmable T-stat [163Kb]
Literature
Air Conditioner Quick-Sheet [105Kb]
Condensate Evaporator Kits [241Kb]
Condensation and Electronics [3983Kb]
Electronic Enclosure Cooling With Special Purpose Air Conditioners [254Kb]
Hazardous Location Series White Paper [234Kb]
Increasing the Lifespan and Reliability of Electrical Components [212Kb]
KLLC100 Lead-Lag Controller (1 page) [58Kb]
Kooltronic Design Guide/Catalog (215 pages) [24440Kb]
Kooltronic Standard Warranty [55Kb]
NEMA Enclosure Ratings [91Kb]
Short-Form Catalog (16 pages) [897Kb]
Airflow Switch Data Sheet [159Kb]
Operator's Manual
KLLC100 Lead-Lag Controller [38Kb]
KLLC480 Lead-Lag Controller [79Kb]
HT Top-Mounted Operator's Manual (1,000-4,000 BTU/H) (OLD) [168Kb]
HT Top-Mounted Operator's Manual W/ Programmable T-stat [708Kb]
Wiring Diagram
K_A4C4HTL Wiring Diagram (Ladder) (W/DIXELL) [47Kb]
K_A4C4HTL Wiring Diagram (Ladder) (W/DIXELL) [48Kb]
K_A4C4HTL Wiring Diagram (Point-to-Point) (W/DIXELL) [58Kb]
K_A4C4HTL Wiring Diagram (Point-to-Point) (W/DIXELL) (NEW) [55Kb]
K_A4C4HTL Wiring Diagram (Point-to-Point) (W/DIXELL) (NEW) [56Kb]
KA4C1-5P24L, KA4C1-4HTL Wiring Diagram (Ladder) [67Kb]
K2A3C2HTT/56 Wiring Diagram (Ladder) [73Kb]
KAC 1 THRU 4 HT Wiring Diagram (Ladder) [80Kb]
K_A4C_HS, KA4C_MMT, K_A4C_HTT, KA4C_NP17, KA4C_NM Wiring Diagram (Ladder)for NP17 units w/ s/n's up to A17A0030 & NP17 units w/ s/n's up to M16A4171 [69Kb]
K2A4C_NP17, K2A4C2.0NM & K2A4C_HTT Wiring Diagram (Ladder) for NP17 units w/ s/n's up to M16A4171 [67Kb]
KA4C2.0NM, KA4C_NP17, KA4C_MMT, KA4C_HTT Wiring Diagram (Ladder) for Micro-Mini units w/ s/n's up to A17A0030 [60Kb]
